Powerful, comfortable performance.
Ideal for contractors, landscapers and property owners with demanding terrain to maintain, the FS 360 C-E has several features aimed at reducing fatigue and allowing comfortable use over long periods.
Efficient, low emission 2-MIX engine
STIHL's 2-MIX technology is behind the engine in the FS 360 C-E, which uses stratified charge to reduce the amount of fuel lost during the charge cycle. Not only does this increase fuel efficiency, but it results in more power with a lower weight and significantly reduced exhaust emissions. There is also a large, transparent and easily accessible fuel tank included, with a volume of 0.75 litres, to provide longer operating intervals with fewer stops.
Simple starting technology
With ErgoStart built-in, the usual effort required to start this brushcutter is reduced by half, while the starter cord can also be pulled at one third of the normal force. The starting process has been made much simpler, and a manual fuel pump is available to deliver fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following long breaks in operation. A winter setting slide control also means you can prevent the filter and carburettor from freezing.
Comfortable, low-fatigue operation
As a bike handle machine, the FS 360 C-E is designed to be easy and comfortable to use over large distances. When used with a harness, the bike handle facilitates a smooth mowing action and easy guiding over big areas. A 4-point anti-vibration system reduces the transmission of vibrations to the handle, again making the machine easy to guide. You can adjust the handles to suit you, without the use of tools, and they can be rotated by up to 90 degrees for easy transportation and storage.
Note: This product is not available for direct delivery:
This product is not available to purchase for direct delivery due to STIHL's delivery policy. If you wish to purchase it, you will need to collect it from a branch at which point you will receive a face to face handover of the product to ensure you get the most from your new machine.