SCH 4MPS Three Point Linkage Mounted Sprayer (4MPS)

SCH 4MPS Three-Point Linkage Mounted Sprayer: Flexible Spraying from Your Compact Tractor

Efficient spraying becomes much easier when the equipment works seamlessly with your tractor. The SCH 4MPS Three-Point Linkage Mounted Sprayer provides a practical solution for applying herbicides, pesticides and liquid fertilisers for small to medium-sized applications.

Designed for tractors with a Category 1 three-point linkage, this British-built sprayer combines a 70-litre (15-gallon) tank with flexible application options. A spray boom handles wider areas, while the supplied hand lance makes targeted treatment straightforward.

12 V Pump Powered Directly from the Tractor

At the heart of the SCH 4MPS is a dependable 12 V diaphragm pump. A connection lead draws power from the tractor’s battery, removing the need for a separate engine or onboard battery.

The pump provides an open-flow delivery rate of 7 litres per minute. Consistent pressure helps support reliable spraying, whether treating a wider area with the boom or focusing on individual locations with the lance.

A pressure gauge allows the operator to monitor performance during work. Adjustable flow rates for both application methods provide further control over liquid delivery.

Switch Between Boom and Spot Spraying

Different jobs call for different approaches, so the SCH 4MPS is supplied with two application options. Its four-nozzle boom provides a generous spray width of 2,440 mm (96 inches). This makes it well suited to efficient coverage of larger areas.

For more targeted treatment, simply switch to the supplied hand lance. Quick-release couplings make changing between the boom and lance straightforward.

This flexibility means the same sprayer is suited to broad applications and precise spot treatment. Users can therefore adapt their approach according to the area and product being applied.

Break-Back Protection for the Spray Boom

Working around trees, posts and other obstacles presents a risk to conventional rigid booms. SCH addresses this with break-back sections built into the 2,440 mm (96-inch) boom.

Should a section make contact with an obstruction, it is designed to fold backwards rather than remain rigid. This helps reduce the likelihood of damaging the boom or the object it encounters.

The break-back feature is particularly valuable when spraying areas where obstacles make maintaining a perfectly clear route difficult.

A Practical 70-Litre Tank

This SCH sprayer’s 70-litre (15-gallon) tank provides useful capacity for small and medium-scale spraying work. Its large lid makes filling straightforward while also providing convenient access when cleaning is required.

Careful filling is especially important when working with treatments that could damage surrounding grass or soil if accidentally spilt. The tank’s generous opening helps make liquid handling more manageable.

For added operator protection, SCH also supplies a 5-litre (1.1-gallon) fresh water wash bottle. This provides a convenient source of clean water for prompt rinsing should accidental chemical contact occur.

Appropriate product instructions and PPE should always be followed when handling spraying chemicals.

Strong Construction Without Excessive Weight

Spraying equipment needs to cope with regular outdoor use, so the SCH 4MPS is built around a fully welded steel frame. This robust construction supports dependable long-term service in demanding working environments.

Despite its sturdy design, the sprayer has an approximate dry weight of only 15 kg (33 lb). When filled, its approximate overall weight rises to 84 kg (185 lb). Tractor suitability and lifting capacity should therefore be considered before use.

Built in Suffolk and Supplied Ready for Work

SCH manufactures its equipment in Suffolk with an emphasis on durability and dependable service. The 4MPS sprayer follows this approach while offering the convenience of arriving fully assembled.

There is no lengthy construction process before first use. Once the sprayer is correctly attached to a suitable Category 1 three-point linkage tractor and connected to its battery, preparation for spraying is straightforward.

Bring Greater Flexibility to Your Spraying Work

The SCH 4MPS Three-Point Linkage Mounted Sprayer combines useful capacity with two very different application methods. Its 2,440 mm (96-inch) four-nozzle boom provides efficient area coverage, while the hand lance handles more selective treatments.

Adjustable flow control, a pressure gauge, break-back boom protection and the 12 V diaphragm pump add to its practical appeal. A welded steel frame completes a sprayer designed for reliable work over the longer term.

Order the SCH 4MPS Three-Point Linkage Mounted Sprayer today and add a versatile, British-built spraying system to your compatible small tractor.

Frequently Asked Questions

Q: What type of tractor is compatible with the SCH 4MPS Sprayer?

The SCH 4MPS is designed for tractors equipped with a Category 1 three-point linkage. Its 12 V diaphragm pump is powered from the tractor’s battery using the supplied connection lead.

Q: Can I use the SCH 4MPS for both broad and targeted spraying?

Yes. The sprayer includes a four-nozzle boom with a 2,440 mm (96-inch) spray width for wider coverage. A hand lance is also supplied for spot spraying, with quick-release couplings making it easy to switch between the two.